Overview
A worn sign doesn’t always mean starting over. If the cabinet, pole, or monument base underneath is still sound, the job may be a face swap or a lighting upgrade rather than a tear-out. Visibility Signs & Graphics looks at what you have, tells you what can stay, and replaces only what needs to go.
What Is Sign Replacement?
Sign replacement covers any job where part or all of an existing sign comes down, and something new goes up in its place. It usually falls into one of three levels:
- Faces: The graphic panels are replaced while the cabinet, frame, and structure stay in place. This is the most common route for a new tenant or a logo change.
- Lighting: Old fluorescent tubes, ballasts, or neon are removed and converted to LED, with or without new faces.
- The whole sign: The cabinet, letters, or full display come off, and a new sign goes up, either on the existing structure or on a new one.
The right level depends on the condition of the existing sign and what you need it to do next. Utah weather is often a factor. Strong high-altitude sun fades and yellows faces over time, and freeze-thaw cycles work moisture into seams, fasteners, and electrical connections. A sign can look fine from the parking lot and still have a cabinet that’s rusting from the inside.
Repair or Replace? How to Decide
One factor rarely settles it on its own, so we weigh these signals together and give you our recommendation:
Age | The sign is relatively recent and the problem is isolated | The sign is older and several components are wearing out at once |
|---|---|---|
Frequency of failures | It’s a one-off issue, like a single failed component or a cracked face | You’re calling for service repeatedly and the fixes don’t hold |
Parts availability | Replacement parts are still easy to source | Tubes, ballasts, transformers, or faces are hard to find, or discontinued |
Energy cost | Your lighting is already efficient | The sign still runs on fluorescent or neon, and you want lower running and maintenance costs |
Brand change | Your name, logo, and colors are staying the same | You’re rebranding or a new business is moving into the space |
Code status | The sign meets current requirements, and you only need to fix it | The structure needs replacing, or the sign no longer meets what your city or landlord requires |
If most of your answers fall in the left column, our Sign Repair team can usually get the sign working again without replacing it.
Types of Sign Replacement We Offer
Sign Face Replacement (Refacing)
Refacing swaps the faces on a cabinet, pylon, or monument sign while the structure stays put. New faces have to be sized to the existing cabinet, so we measure the opening and retainers before producing anything. The common face types are:
- Flex faces: A flexible material stretched across the cabinet, often used on larger signs where a single rigid panel would be impractical.
- Pan faces: Formed acrylic or polycarbonate panels with a raised, shaped edge that adds depth.
- Push-through faces: Letters or logos cut from acrylic and pushed through an opaque face so only the graphics light up at night.
Flat acrylic and polycarbonate faces are also options. The right material depends on the sign’s size, its exposure, and how you want it to look after dark.
Tenant Panel Replacement
On multi-tenant pylon and monument signs, each business has its own panel. When a tenant moves out, or a new one moves in, only that panel changes. Most property owners set criteria for size, colors, and layout, and the landlord usually has to approve the new panel before it’s installed. We build the panel to fit the existing slot and match the rest of the sign.
LED Retrofits
An LED retrofit converts a fluorescent or neon sign to LED lighting without replacing the cabinet. We use UL 879A-listed retrofit kits, which are tested to the UL safety standard for LED sign retrofit kits. LEDs typically use less power and last longer than fluorescent tubes and neon, which can mean lower energy bills and fewer service calls. How much you save depends on your current lighting, hours of operation, and the sign’s size. A retrofit is often paired with new faces, since the lighting change is a practical time to refresh the graphics.
Channel Letter Replacement
If you have channel letters mounted on a raceway, you don’t always need a whole new set. We can replace one damaged letter, swap a few letters for a name change, or replace the full set while reusing the existing raceway when it’s in good shape.
Full Sign Replacement
Sometimes the right answer is a new sign. That might be a new cabinet on your existing pylon, a new monument, one of our LED signs with a digital display, or a complete structure where the old one has failed. When the existing footings and poles are sound, reusing them can reduce cost and simplify the job. When they aren’t, we plan for a new structure from the ground up.
Sign Removal and Disposal
Removal covers the full take-down: we remove the sign, dispose of the old materials, cap off the electrical connection, and patch the wall where the sign was mounted. We do this whether the sign is being replaced or simply needs to come down before a tenant hands back the keys.
Replacing Signs During a Rebrand or New Tenancy
A rebrand and a new tenancy both end with a new sign, but the steps leading up to it differ.
For a rebrand, the goal is to get your new logo, colors, and name onto every sign without a stretch where some locations show the old brand and others show the new one. With several locations, that means planning the order, checking each site’s existing structure, and lining up permits so installs happen close together. Our rebranding page covers the wider process.
For a new tenancy, the first job is often removing the previous tenant’s sign. After that, the new sign has to follow the landlord’s sign criteria, which can set size, placement, lighting, and color. The landlord usually signs off before the permit application goes in. Property managers who handle frequent tenant turnover can find more on our property management signs page.
Permits and Code for Replacement Signs
Each Utah city sets its own permit rules for replacement signs, and the details vary. A few points come up often:
- A reface is often treated differently from a new sign: In many Utah cities, replacing the faces in an existing cabinet goes through a different, often simpler, review than installing a new sign. Whether a straight face change needs a sign permit depends on the city’s sign code.
- Grandfathered signs can lose that status: A legal nonconforming sign is one that was allowed when it went up but doesn’t meet current code for size, height, or location. These signs can usually stay as they are. Replacing the structure, and in some cities making major changes to the cabinet, can end that status, and the replacement then has to meet current rules.
- Retrofits usually involve electrical work: Converting a sign to LED changes its wiring, and many jurisdictions require an electrical permit for that work.
Because these rules vary, we check your city’s requirements before recommending a reface, retrofit, or full replacement. If your sign is grandfathered, that status can limit which options we can keep, so mention it at the start.
Our Sign Replacement Process
- Assessment: We start with a free sign consultation to look at your existing sign, its structure, lighting, and electrical, and talk through what you need.
- Recommendation: Based on what we find, we recommend a reface, a retrofit, or a full replacement, and explain why.
- Design: We design the new faces, panels, or signs to fit your existing cabinet or structure, or to meet the requirements for a new one.
- Permit: We check what your city requires and handle the permit application.
- Fabrication: We build the new faces, lighting, or sign in-house.
- Removal and installation: Where possible, we remove the old sign and complete the sign installation in a single visit, so your storefront goes without a sign for as little time as possible.
- Disposal: We haul away and dispose of the old faces, lighting, or sign.
- Final check: We confirm the new sign is lit, secure, and working before we leave.
After installation, scheduled sign maintenance helps keep the new sign lit, clean, and working.
Cost Factors for Sign Replacement
Every replacement is priced on the specific sign and site. These are the factors that move the number:
- Structure reuse: Keeping an existing cabinet, pole, or monument base is often the biggest cost saver. A new structure adds materials, engineering, and foundation work.
- Face material: Flex, pan, push-through and flat faces differ in material and fabrication time.
- Illumination type: Non-lit signs, LED-lit cabinets, and digital displays are priced very differently, and an LED retrofit adds parts and electrical work.
- Size and height: Larger and taller signs take more material and may need a lift or crane to install.
- Permit fees: Your city sets these, and they vary with the type of work.
- Removal and disposal: The size of the old sign, how it’s mounted, and whether the wall needs patching all affect this part of the job.
The fastest way to an accurate number is to show us what you have.
Why Choose Visibility Signs & Graphics
We handle design, fabrication, and installation in-house, so the people measuring your cabinet work directly with the people building the new faces. That matters on replacement work, where a face that’s slightly the wrong size won’t fit the existing frame.
We also replace signs built by other companies. We measure and evaluate what’s there ourselves, so you don’t need the original fabricator’s drawings for us to assess your sign. And we work across the state, so whether you have one location or several, you can check our Utah service areas to confirm we cover yours.
Sign Replacement FAQs
Is it cheaper to replace the sign face or the whole sign?
Replacing the faces is usually the lower-cost option, because the cabinet, structure, and often the electrical stay in place. A full replacement makes more sense when the cabinet or structure is damaged, the lighting is failing, or the sign no longer fits your brand or the code.
Can you reuse my existing pylon or monument structure?
Often, yes. We inspect the structure, footings, and pole for rust, damage, and stability before recommending reuse. If it’s sound, you can add a new cabinet or new faces to the existing structure. If you have a grandfathered sign, keep in mind that replacing the structure itself can affect that status.
How do I know if my sign should be repaired or replaced?
Consider how often it fails, whether parts are still available, how old it is, and whether your brand is changing. A single failed component usually points to a repair. Repeated breakdowns, hard-to-find parts, outdated lighting, or a new logo point toward replacement. We’ll give you our assessment either way.
Do I need a permit to replace a sign face in Utah?
It depends on the city. Some Utah cities require a sign permit for a face change, while others don’t, and an LED retrofit may require an electrical permit. We check your city’s requirements before work begins.
Can you convert my fluorescent or neon sign to LED?
Yes. We retrofit fluorescent and neon signs with UL 879A-listed LED retrofit kits, usually keeping the existing cabinet. Many owners replace the faces at the same time.
Will you remove and dispose of the old sign?
Yes. Removal includes taking down the old sign, disposing of it, capping off the electrical, and patching the wall where it was mounted.
Can you replace a sign another company built?
Yes. We replace faces, lighting, and full signs on signs other companies built. We measure and assess the existing sign ourselves, so you don’t need the original drawings.
How long does a sign replacement take?
It depends on the scope. A face swap on an existing cabinet is generally faster than a full replacement, which involves more design and fabrication and possibly a new structure. Permit review times also vary by city. We’ll give you a timeline for your project once we’ve seen the sign.
Get a Sign Replacement Quote
Tell us about the sign you want replaced, and we’ll recommend the right approach, whether that’s new faces, an LED retrofit, or a new sign. Send a photo of your current sign for a faster estimate.
(801) 212-9987