Visibility Signs & Graphics - Salt Lake City

Sign Consultation in Utah

A sign consultation with Visibility Signs & Graphics is a free planning session. Our team reviews your site, your brand, and your city's sign rules, then recommends the sign type, size, materials, and budget before you commit to production.

Design · Production · Installation

Overview

Most sign problems start before anything is built. The sign is ordered at the wrong size for the road it faces, the landlord rejects the colors, or the city denies the permit because the frontage allowance is already used up. A consultation catches those problems on paper, while changes still cost nothing.

What is a sign consultation?

A sign consultation is a planning conversation about one question: what sign should this business put up, at this location, under these rules? It covers the sign type, its size and placement, how it will be lit, what it will be made of, what approvals it needs, and roughly what it will cost.

A sign specialist or project manager leads your consultation. That same person carries the details into design and production if you go ahead, so the measurements, landlord requirements, and budget limits from the first meeting don't get lost when the project changes hands.

A sales call starts from the product being sold. A consultation starts with your building and its limits, and the recommendation follows from them. Sometimes that means a smaller sign than you pictured, a different lighting style, or window graphics instead of a second wall sign because the city won't allow one.

What we review during your consultation

Your business goals and audience

We start with who needs to see the sign and when. A restaurant on a 45 mph road has to be readable to drivers several hundred feet away, often after dark. A boutique in a walkable district is seen by people on the sidewalk, a few feet from the door. Even on similar budgets, those two businesses need different letter sizes, mounting heights, and lighting.

We also ask what the sign has to do: announce a new location, help customers find an entrance, match a corporate brand standard, or replace a sign that no longer fits the business.

Your site and building

We assess the physical conditions the sign has to work with:

  • Frontage: The width of the building face or lot line, which often sets how much sign area the city allows
  • Setbacks: How far a freestanding sign must sit from the property line, sidewalk, or driveway
  • Mounting surface: Stucco, brick, EIFS, metal panel, or glass, each of which changes how a sign is attached
  • Power access: Whether there's an electrical circuit where a lit sign would go
  • Sightlines: Trees, neighboring signs, parked trucks, or roof lines that block the view from the street

Your brand assets

We review your logo files, brand colors, and any brand guidelines. Vector files (AI, EPS, SVG, or vector PDF) are the most useful. A low-resolution logo copied from a website is enough to start the conversation, but it usually has to be redrawn before fabrication, and we'll tell you that up front.

Local sign codes and approvals

One sign can fall under several sets of rules, and they don't always agree.

City zoning ordinances control sign types, sizes, heights, lighting, and the total sign area allowed per property, which is often calculated from the building or lot frontage. Each Utah city writes its own code, so a sign approved in one city may not be allowed a few miles away.

Shopping centers, office parks, and multi-tenant buildings often have landlord sign criteria or a master sign program. These can limit letter height, colors, fonts, lighting type, and mounting method, and the landlord typically has to approve a tenant's sign before the permit application goes in.

In business parks and mixed-use developments, HOA rules and CC&Rs can add one more approval step.

We review the rules that apply to your site and point out conflicts or open questions. The city makes the final permit decision, so we explain what we expect and why instead of promising an outcome.

Budget and timeline

We ask what you want to spend and when the sign needs to be up, such as an opening date or a lease deadline. With a realistic budget range, we can recommend materials and lighting that fit it, so you don't end up scaling back a design later.

What you receive after the consultation

When the sign consultation process is done, you have what you need to decide:

  • A sign recommendation: The sign type, size, placement, lighting, and materials we recommend, with the reason for each choice
  • A rendering or photo mock-up: The proposed sign shown on a photo of your actual building, so you and your landlord can judge scale and placement
  • An itemized estimate: Design, fabrication, permit, and installation listed separately, so you can see where the money goes
  • Permit feasibility notes: What the city, landlord, or HOA is likely to require, and any concerns we found
  • A project timeline: The expected order of steps from approval through permitting, production, and installation

Our sign consultation process

  1. Request. You book a consultation through our contact form or by phone and tell us the address and what you're planning.
  2. Discovery call. We talk through your goals, timeline, budget, and any landlord or HOA requirements you already have.
  3. Site survey and measurements. We measure the frontage, mounting surfaces, and sightlines, check power access, and photograph the building.
  4. Concept and rendering. Our sign design team develops a concept and places it on your building photo.
  5. Estimate and revisions. You get an itemized estimate and can change the size, materials, or lighting before anything is final.
  6. Approval. You approve the design and estimate, and we prepare what the landlord and city need for their reviews.
  7. Handoff to production. Your project moves into final artwork, fabrication, and professional finishing, with everything from the consultation carried forward.

Choosing the right sign type

Most businesses come in with a sign type in mind. The table shows where each type fits best, so you can check your first idea against your site.

Sign type comparison

Sign type

Best use

Illumination

Typical permit need

Monument signs

Freestanding ID near the road for offices, medical buildings, churches and business parks

Non-lit, front-lit or internally lit

Usually required; setback and height limits apply

Channel letters

Building-mounted lettering for retail, restaurants and storefronts

Front-lit, halo-lit or both

Usually required; often reviewed against landlord criteria

Pylon signs

Tall freestanding signs for highway visibility or multi-tenant centers

Usually internally lit cabinets

Usually required; height is often tightly limited

LED signs

Programmable messages, promotions, and event updates

LED display

Usually required; many cities limit brightness and message changes

Storefront and blade signs

Visibility at street level in walkable districts

Non-lit or lit

Often required; signs projecting over sidewalks may need extra approval

ADA and wayfinding signs

Room ID, directional and accessibility signs inside and around buildings

Usually non-lit

ADA compliance required for applicable signs; exterior permits vary

Window graphics

Hours, services and branding on glass

Non-lit

Varies; some cities count window coverage toward sign area

Factors that drive your sign recommendation

Viewing distance and letter height

A common sign-industry guideline is about 1 inch of letter height for every 10 feet of viewing distance. By that rule, letters meant to be read from 200 feet away need to be roughly 20 inches tall.

We use that number as a starting point. Contrast, font weight, lighting, and traffic speed all affect how readable a sign really is. On fast roads, we often recommend going larger, and where people walk past, smaller letters can work.

Illumination

Front-lit signs shine light through a translucent face and are usually the easiest to read at night. Halo-lit (back-lit) letters throw light onto the wall behind them, which gives a softer outline that suits professional offices and upscale retail. Non-lit signs cost less to build and run, and they work well when the business closes before dark, or the site already has good lighting. Some landlord criteria and city codes specify which of these you can use.

Materials

Aluminum is the usual choice for sign cabinets, letter returns, and monument faces because it's strong and won't rust. Acrylic is used for lit faces. ACM (aluminum composite material) makes flat, rigid panels for less money. PVC suits lighter-duty indoor and outdoor work, and HDU (high-density urethane) can be carved or routed for dimensional signs. We recommend materials based on exposure, budget, and the look you want.

Utah climate

Utah weather is harder on signs than many buyers expect. Winter snow piles weight onto the tops of freestanding signs and cabinets. Freeze-thaw cycles push water into joints and fasteners. High-altitude UV fades colors and breaks down some plastics faster, and canyon and valley winds strain tall signs. We factor these conditions into our material, finish, and structural recommendations.

Maintenance needs

A sign that's easy to reach and service costs less over its life. We look at how future lamp or LED module changes will be done, how the faces can be cleaned, and how the finish will hold up.

ADA requirements

Signs that identify permanent rooms and spaces must follow the 2010 ADA Standards for Accessible Design. Applicable signs need raised (tactile) characters and Grade 2 Braille, and the standards set rules for contrast and non-glare finishes. Tactile characters must sit between 48 and 60 inches above the floor, measured to the baseline of the text.

If your project includes interior signs, we'll tell you which ones need to comply. Our ADA signs page has more detail.

Consultations for multi-location and property portfolios

When a business opens its second, fifth, or tenth Utah location, its signs need to read as one brand, even though each city allows something different. We plan around the strictest site first and then scale the design so it works at every address, so you don't end up with a one-off sign at each location.

Property managers have a different problem: writing tenant sign criteria that keep a center consistent while still giving each tenant enough visibility. We help draft or update those criteria, review tenant submissions against them, and plan monument or pylon updates for the property. Learn more about our property management signs.

For larger programs, we can plan a phased rollout that orders sites by lease dates, budget cycles, or permit timelines, and our sign project management keeps each location on schedule.

If you're changing a logo or name across existing locations, a consultation is also the first step for rebranding: each current sign needs a decision to update, reface, or replace.

Why Utah businesses choose Visibility Signs & Graphics

We design, fabricate, and install signs in-house, so the people who recommend your sign work alongside the people who build and install it. The measurements, mounting conditions, and landlord limits recorded at your consultation go straight to the production team.

With four offices in Utah, our team works with businesses across the state. See our Utah service areas to find the office nearest you.

Visibility Signs & Graphics was formerly Timpanogos Custom Signs. The name has changed, but the team and the way we plan signs have not.

Frequently asked questions

Is the sign consultation really free? Is there any obligation?

The consultation is free, and there's no obligation to buy. You can use the recommendation and estimate to plan your budget, get landlord feedback, or compare options before you decide.

How long does a sign consultation take?

That depends on the project. A single storefront sign takes less discovery and survey time than a multi-tenant property or a rollout across several locations. When you book, we'll tell you when to expect the recommendation, rendering, and estimate.

Do you come to my location, or can we consult virtually?

We can do either. Many projects start with a phone or video call and then move to a site survey to measure the building and check mounting and power. If you're early in planning, you can send us photos and measurements to get started.

What should I bring or prepare?

Bring what you have: logo files (vector formats are best), brand colors or guidelines, your landlord's sign criteria or the sign section of your lease, any HOA requirements, photos of the front of the building, and a rough budget and target date. If a permit was rejected before, bring that too. The rejection reason shows us what the city is likely to check.

Will you tell me if my city will approve the sign?

We review the city’s sign code for your site and tell you what we expect to be allowed, what may cause problems, and what the permit application will probably require. The city makes the final decision, so what you get from us is an honest feasibility assessment, not a guarantee.

Can you work with my landlord's or shopping center's sign criteria?

Yes. Bring the criteria to the consultation, and we'll design within its limits on size, color, font, lighting, and mounting. If the criteria conflict with the city code, we'll flag the conflict so you can resolve it with the landlord before paying for fabrication.

What does a commercial sign typically cost in Utah?

Cost depends on the sign type, size, lighting and materials, the installation conditions (such as lift access or electrical work), and your city's permit fees. A small non-lit panel and a large lit monument sign sit at opposite ends of the range. The consultation gives you an itemized estimate for your actual site, which is more useful for budgeting than a general price range.

How soon after the consultation can production start?

Production starts once you've approved the design and estimate and any required landlord or city approvals are in place. Permit review times vary by city, so your project timeline lays out the expected steps, and you can plan around an opening date or lease deadline.

Plan your sign before you buy it

Our team reviews your site, brand, and city rules and returns a rendering and estimate, so you know what to build before you commit.

Book your free sign consultation or call (801) 212-9987.