Visibility Signs & Graphics - Salt Lake City

Bank Signs in Utah

Bank signs identify branches and guide members through drive-thru lanes, ATMs, and lobbies while reflecting the trust and stability customers expect from a financial institution.

Design · Production · Installation

Overview

Bank signs identify branches and guide members through drive-thru lanes, ATMs, and lobbies while reflecting the trust and stability customers expect from a financial institution. Visibility Signs & Graphics designs, builds, and installs signage for banks, credit unions, and financial offices across Utah, from a single branch to a full network rebrand.

Get a Free Quote ↗

Call (801) 212-9987

Exterior Bank Signs

Exterior bank signs and credit union signs identify the branch from the street and direct drivers to the right lane, ATM, or parking spot. Most branches need a building sign, a monument sign, drive-thru and ATM signs, and directional signs, all in one brand style.

Building Signs and Channel Letters

Bank building signs are usually channel letters mounted on the facade and lit from the front or behind. Front-lit letters glow through colored faces and read clearly from a distance. Halo-lit letters light the wall behind them, a quieter look that suits many financial institutions. Our guide to front-lit vs. halo-lit channel letters compares the two. Letter size depends on how far away drivers are and how much sign area the city allows. Where a branch has an awning or canopy over the entrance, awning signs can carry the name there too.

Monument Signs

Bank monument signs identify the branch at the street, where drivers decide whether to turn in. A monument sign usually carries the logo and branch name, and its base can match the building’s stone, brick, or metal. Some branches add a time and temperature display or an LED message board for rates and announcements. We can build electronic message centers into the monument, within city limits, with limits on brightness and how often messages change. Many cities limit how close a monument can sit to a driveway, so drivers pulling out can see oncoming traffic.

Drive-Thru and ATM Signs

Drive-thru and ATM signs tell drivers which lane to use, whether it is open, and whether their vehicle fits. Drive-thru lane signs show lane numbers and the services each lane offers. Lit open/closed indicators show which lanes are staffed. Clearance bars hang at the lane entrance and warn tall vehicles before they reach the canopy. ATM signs mark walk-up and drive-up machines, and canopy signs carry the brand over the lanes. Drivers read these signs through a car window while moving slowly, so short, high-contrast text works best.

Directional and Parking Signs

Directional and parking signs guide drivers from the street entrance to the right place on the lot. Typical signs point to the drive-thru, ATM, lobby entrance, and customer parking. Keep each sign to one or two messages so drivers can read it without stopping. Reserved parking signs can mark spaces for loan or business banking appointments. Use the same colors and letter style as the building sign so the whole site reads as one brand.

Interior Bank Signs

Interior bank signs welcome customers, organize the lobby, and identify offices and rooms. Lobby logo walls and lobby signs put the brand behind the reception desk or teller line. Teller line and queue signs show customers where to wait and which windows are open. Place them where customers can see them from the door, so nobody has to ask where to go. Office and room ID signs name loan offices, conference rooms, and restrooms. Permanent room signs must meet the ADA rules covered below. Rate boards and promotional displays share current rates and offers. Digital signs let a branch change rates and messages on screen instead of reprinting displays.

Branding Consistency Across Branches

Consistent bank signage means customers see the same logo, colors, and letter style at every branch. We follow your brand standards manual, so letter sizes, fonts, and spacing match the approved specs. We match your brand colors across vinyl, paint, acrylic, and LED lighting, which can each show the same color differently. Using one letter style everywhere keeps older branches from looking dated next to newer ones. Our article on consistent branding across signs explains how a uniform look supports customer trust.

For rebranding and mergers, we schedule the rollout around your launch date. That means surveying each branch, producing signs in batches, and installing in a planned order. Older branches often have mixed letter styles, faded colors, or outdated logos, and the rollout corrects all of that at once.

ADA and Code Considerations

Interior signs for permanent rooms fall under the 2010 ADA Standards for Accessible Design, while exterior and drive-thru signs fall under city sign codes. Under the 2010 Standards, signs that identify permanent rooms and spaces, such as restrooms, offices, and conference rooms, need raised characters and Grade 2 braille. Mount tactile characters 48 to 60 inches above the floor, measured to the baseline of the text, and usually place them on the latch side of the door. Characters need a non-glare finish and strong contrast with their background. Our ADA signs page covers these requirements in more detail.

Outside, each city sets its own rules for sign size, height, lighting, and electronic messages, including drive-thru signs. Our Utah sign permits guide explains how the process works. We design signs to these rules, but final approval rests with the city and building officials.

Our Bank Sign Process

Our bank sign process has six steps, from surveying the branch to maintaining the signs after installation.

  1. Branch survey. We measure the building and site, check wall construction and electrical access, and photograph existing signs. For a rebrand, we record every sign so we don't miss anything with the old name.
  2. Design to brand standards. We prepare drawings that follow your brand manual and send them to you for approval. If the manual doesn’t cover a sign type, such as a clearance bar, we propose a design that fits your standards.
  3. Permits. We handle the zoning research and submit permit applications to the city.
  4. Fabrication. We build each sign to the approved drawings and brand colors.
  5. After-hours or weekend installation. We install when the branch is closed, so lobbies, drive-thru lanes, and parking stay open for customers.
  6. Maintenance program. After installation, we service lit signs to keep them bright and consistent across branches. That can include replacing failed LED modules, securing loose hardware, and repairing damage.

Why Utah Banks and Credit Unions Choose Visibility Signs & Graphics

Utah banks and credit unions choose us because one team can handle exterior and interior financial institution signs at every branch and maintain them afterward.

  • Multi-branch rollouts. We plan surveys, production, and installs across all locations, so we can roll out a rebrand or merger on schedule.
  • Exterior and interior from one team. One shop builds monument, drive-thru, and lobby signs, keeping colors and letters consistent. We also make corporate signs for administrative and headquarters offices.
  • Maintenance for lit signs. Our sign maintenance service covers channel letters, lit monuments, and digital displays.

Bank Sign FAQs

What signs does a bank branch need?

Most bank branch signs include a building sign, a monument sign at the street, drive-thru and ATM signs, directional signs, and interior lobby and room signs. Permanent room signs must also meet ADA requirements. The exact list depends on the site, the services each branch offers, and what the city allows.

Can you rebrand signs for all our branches at once?

Yes, we can rebrand signs across all your branches as one coordinated project. We survey each location, produce signs in batches, and schedule installs so branches change over on a planned timeline. Permits are approved city by city, so we build review time into the schedule.

Do you make drive-thru lane and ATM signs?

Yes, we make drive-thru lane and ATM signs, including lane numbers, open/closed indicators, clearance bars, and canopy signs. We also make signs for walk-up and drive-up ATMs. We match each sign to your branch’s colors and lettering, so the drive-thru looks like part of the same building.

Can you install after business hours?

Yes, we can install after business hours or on weekends. Working when the branch is closed keeps lobbies, drive-thru lanes, and parking open for customers. We coordinate access, timing, and any power shutoffs with your facilities team ahead of time, so the branch opens normally the next day.

Do interior bank signs need to be ADA compliant?

Yes, interior signs that identify permanent rooms, such as restrooms and offices, must meet the 2010 ADA Standards. These signs need raised characters, Grade 2 Braille, and specific mounting heights. Temporary signs and promotional displays generally don’t need tactile text. We design to the standards, and your building official handles the final inspection.

Do you maintain illuminated bank signs?

Yes, we maintain illuminated bank signs, including channel letters, lit monument signs, and digital displays. Service can include replacing failed LED modules, refinishing faded faces, securing loose hardware, and cleaning. Ongoing maintenance plans are available for branches that want scheduled service.

Get Started

Tell us about your branch or rebrand for a quote.

Or call (801) 212-9987.