Visibility Signs & Graphics - Salt Lake City

Hotel Signs in Utah

Hotel signs guide guests from the highway exit to their room door: a tall pylon or monument sign to find the property, building and entrance signs to check in, and room number and wayfinding signs inside. Visibility Signs & Graphics designs, builds, and installs hotel signage for independent and franchise hotels, motels, and resorts across Utah.

Design · Production · Installation

Overview

Get a Free Quote ↗

Call (801) 212-9987

Exterior Hotel Signs

Exterior hotel signs help drivers find your property, turn in at the right driveway, and get to check-in without guessing. Most hotels and motels need tall road signs, entrance signs, and building signs. The right mix depends on your site and what your city’s sign code allows.

Pylon and High-Rise Signs

Hotel pylon signs make your property visible from highways and interstates. A driver at freeway speed has little time to read your name and decide to exit, so height, letter size, and lighting matter. A pylon can carry the brand cabinet alone or add a vacancy or rate panel below it. High-rise signs near the top of a tall building do the same job from farther away. Read more about our pylon signs.

Monument Signs

Monument signs identify your entrance at ground level. They sit low and close to the driveway, so guests who have already spotted you turn in at the right place. A monument can also hold a vacancy panel or one of our LED signs for rates, group welcomes, or event notices. See our monument signs for more options.

Building and Channel Letter Signs

Building signs put your brand name on the building itself. Illuminated channel letters are the usual choice for night readability: individual letters, each lit from inside or from behind. On franchise properties, the brand’s sign package determines letter style, colors, and logo placement.

Porte-Cochere, Parking and Directional Signs

Clear signage means fewer drivers circling the lot looking for the lobby. A porte-cochere sign marks the covered drop-off for check-in and directs guests from the driveway to the front desk. Parking signs separate guest, staff, oversize-vehicle, and EV charging spaces. Directional signs guide delivery trucks and vendors to the service entrance.

Interior Hotel Signs

Interior hotel signs guide guests from the lobby to their room and to every amenity along the way. We plan hotel wayfinding signs as one system, with the same fonts, colors, arrows, and room-range format on every floor. A typical interior package includes:

  • Lobby and Front Desk Signs: A dimensional or lit logo behind the desk confirms guests are in the right place. See our lobby signs.
  • Elevator and Floor Directional Signs: Room-range signs at each elevator landing and arrows at hallway turns.
  • Room Number Signs: Tactile, braille room ID signs at every guest room door.
  • Meeting Room and Amenity Signs: Ballrooms, business center, breakfast area, guest laundry, ice and vending.
  • Pool and Fitness Rules: Hours, rules, and safety notices. Pool signs often need set wording from health rules, so we build them to the text your property supplies.

ADA Requirements for Hotel Signage

Hotel signs that identify guest rooms and other permanent spaces need raised characters and Grade 2 braille under the 2010 ADA Standards for Accessible Design, Section 703:

  • Room Identification Signs. Guest rooms, restrooms, and meeting rooms are permanent spaces, so their signs need tactile characters and braille. Exit stair and exit door signs need them too.
  • Mounting. Tactile characters sit between 48 inches above the floor (baseline of the lowest character) and 60 inches (baseline of the highest), usually on the latch side of the door.
  • Directional and Informational Signs. Signs such as “Pool” with an arrow or “Elevators” don’t need braille, but they must meet the visual character rules for contrast, non-glare finish, and character size based on viewing distance.

These points summarize the standard. Your architect or local building official decides what applies to your property. See how we build ADA signs.

Franchise Brand Standards and Hotel Renovations

We build franchise hotel signs according to your brand’s sign standards for logos, colors, letter sizes, materials, and lighting. We work from your brand’s sign package and your site plan, then fabricate to those drawings.

Brand Conversions

When a property changes flags, most exterior signs and many interior signs change at once: pylon cabinet faces, monument panels, building letters, and the front desk logo. Existing structures can sometimes take new faces, depending on their condition and the new brand’s size requirements. Our sign replacement service covers removal and swap-out.

Renovations and PIPs

A property improvement plan (PIP) often lists sign updates, from new room ID signs to replacing older exterior signs. We can price the sign items on your PIP.

Permits

New exterior signs and structural changes usually need a permit from the city or county. Height, size, lighting, and placement rules vary by jurisdiction. We coordinate the application. See our guide to Utah sign permits.

Our Hotel Sign Process

Our process involves six steps, from site survey to maintenance:

Property Survey and Sign Schedule

We walk the property, measure and photograph existing signs, then build a schedule for every sign, its location, size, and quantity.

Design to Brand or Custom Identity

Franchise projects follow the brand’s sign package. Independent hotels, motels, and resorts get a custom design built around their name and logo.

Permits and Approvals

We coordinate exterior sign permits and any brand, owner, or landlord sign-offs.

Fabrication

We build interior and exterior signs according to the approved drawings and schedule.

Installation is Scheduled around Guest Occupancy

We plan work hours, equipment placement, and interior work around check-in, check-out, and booked floors. This allows minimum disruption for guests and rooms.

6. Maintenance

Lit signs need service over time. We maintain illuminated signs after installation through our sign maintenance service.

Why Utah Hotels Choose Visibility Signs & Graphics

One team handles your exterior, interior, and ADA signs. This means:

  • One Sign Schedule: We plan pylon, building letters, lobby signs, and room numbers together so fonts, colors, and branding match across the property.
  • Phased Installs: We split work by building, floor, or sign type to fit around occupancy and renovation schedules.
  • Maintenance of Lit Signs: The team that installs your illuminated signs can also service them.

For restaurants, bars, and event venues, see our hospitality signs. For a broader look at how signs shape the guest experience, read our hospitality signage guide.

Hotel Signs in Utah: FAQs

What signs does a hotel need?

Most hotels need a pylon or monument sign, building signs, entrance and parking signs, lobby signs, directional signs, and ADA room number signs. Many also need amenity, meeting room, and pool rules signs. The exact list depends on the property, site, and the brand’s sign standards for franchise hotels.

Do hotel room number signs need braille?

Yes. Under the 2010 ADA Standards, signs that identify permanent rooms, including guest rooms, need raised characters and Grade 2 braille. They also follow mounting height and location rules. Directional signs, such as floor arrows, don’t need braille, but they must meet visual rules for contrast, finish, and character size.

Can you build signs to our franchise brand standards?

Yes. We fabricate franchise hotel signs from the brand’s sign package, matching its logos, colors, letter sizes, materials, and lighting. Send us the brand specs and your site plan, and we’ll build a sign schedule that covers each required exterior and interior sign.

How tall can a hotel pylon sign be in Utah?

It depends on the city or county where the hotel sits. Each jurisdiction sets its own limits on pylon height, sign area, and setbacks. We check the local code during the property survey. Our Utah sign permits guide explains the process.

Can you replace signs during a brand conversion?

Yes. We remove the old brand’s signs and install the new brand’s exterior and interior signs as part of a conversion. If existing pylon or monument structures are in good shape and fit the new brand’s sizes, new faces may be an option. We review each structure during the property survey.

Do you install signs while the hotel stays open?

Yes. We schedule installation around guest occupancy, so the hotel can keep operating. Exterior work is planned around check-in and check-out traffic. We can phase interior work, such as room number signs, floor by floor, so you can keep renting rooms while signs go up in other areas.

Get a Full Hotel Sign Quote

Send us your property details for a full hotel sign quote. Include your address, brand (if any), a list of the signs you need, and any brand sign package or PIP.

Call (801) 212-9987