Visibility Signs & Graphics - Salt Lake City

College Signs in Utah

College signs help students, faculty, and visitors find their way around large campuses and recognize the institution’s brand, from gateway monuments and building identification to directories, residence hall signs, and classroom IDs.

Design · Production · Installation

Overview

College signs help students, faculty, and visitors find their way around large campuses and recognize the institution’s brand, from gateway monuments and building identification to directories, residence hall signs, and classroom IDs. Visibility Signs & Graphics designs, builds, and installs signage for colleges, universities, and technical schools across Utah.

Get a Free Quote ↗

Call (801) 212-9987

Campus Exterior Signs

The exterior signage makes it easy to locate the entrance to the campus, name each building, and guide drivers and walkers to the correct lot/door.

Gateway and entrance monuments. Typically, the main entrances are identified with a large ground sign with the name and marks of the institution. Masonry bases, dimensional letters, and lighting allow our monument signs to be constructed to be viewable day and night.

Building identification signs. The name of a building should be visible on the map, and the visitor should be able to match this name with the name on the building. We make building signage for new construction and for buildings that have been renamed.

Vehicular and pedestrian directional signs. Short signs are needed for motorists, and closer, more detailed signs are needed for pedestrians. Many campuses have post and panel signs on pedestrian paths since the panels can be replaced if a department relocates.

Campus maps and kiosks. Parking area map kiosks, transit stop map kiosks, and main walkway map kiosks assist visitors with orientation.

Parking lot and permit signs. The use of Lot numbers, Permit zones, Enforcement and Visitor parking should be uniform throughout the lots.

Campus Wayfinding Systems

A campus wayfinding signs system is a planned system of signs that can be used to move people from the parking lot to a specific room without asking for assistance. As signs are added to a large campus, they are likely to overlap: names don't correspond to the map, and styles vary from one quad to another.

A sign family helps with this. The fonts, colors, materials, and message rules are all the same for each of the sign types, from entrance monument to room sign. Users of this system only have to learn it once and will be able to use it anywhere on campus.

Three important decisions determine the effectiveness of campus wayfinding:

Building names and numbers. Apply one official name and one number for each building, and use this name and number on signs, maps, websites, and schedules.

Maps at decision points. Put maps and directionals at points of route divergence; this is not just at the front door.

First-week and tour traffic. New students, parents, and tour groups are not familiar with campus. Student centre, admissions, and orientation should be readily accessible from all of the main entrances.

Our article on architectural wayfinding strategy explains how to plan sign types, placement, and message hierarchy.

Interior Signs for Academic Buildings

Interior signs guide people from the lobby to a classroom, lab, or office, and they cover ADA room identification and donor recognition.

Building directories. A lobby directory provides information on floors and departments/key rooms. Changeable inserts can be used with our directory signs.

Classroom and lab room IDs. Permanent rooms need tactile room signs with raised characters and braille. Our room ID signs can include paper or window inserts for course or occupant names.

Lecture hall signs. The need for signs at each entrance to large halls, traditionally, should be avoided, and there should be a hall name visible from the corridor.

Department and faculty office signs. Signs on the office door can change easily and often to accommodate faculty changes.

Donor recognition walls. Wall displays can be used to incorporate names over time for named buildings, rooms, and gifts.

These sign types are part of our wider architectural signage work, so interior signs can match the exterior system.

Residence Halls, Athletics and Student Life

Signage in residence halls, athletic facilities, and student spaces guides people to their room or athletic space and identifies the school.

Dorm signs. Room numbers, floor and wing signs, stairwell IDs, lounge, and laundry signs should be installed in residence halls. While dorm room numbers get daily use, it's important to use solid materials and secure mounting.

Athletic facility graphics. Gyms, fields, and locker rooms can carry school colors and team names on walls, windows, and banners.

Student center graphics. Large murals can turn plain walls in dining halls, lounges, and study areas into branded spaces.

Event banners. Whether it is for orientation or homecoming, graduation or athletics, there is a need for temporary messaging. We print our banners for indoor and outdoor use.

Brand Standards for Universities

All of the university signs should be consistent with the university logo, colour, and type standards to ensure that all signs appear as if they belong to the same school. We design according to your brand and can match the approved colors, fonts, and logo lockups.

Things become more inconsistent between individual colleges within the same university, satellites, and leased locations. A documented sign standard allows the individual location(s) to order signs that are still compliant with the main campus sign standard.

Many indicators can be impacted by the rebrand. We can assist in an inventory of what changes are needed, prioritize and replace signs in phases, starting with high visibility signs first.

ADA Requirements on Campus

The 2010 ADA Standards for Accessible Design require tactile signs, with raised characters and Grade 2 braille, wherever a sign identifies a permanent room or space, such as a classroom, lab, office, or restroom. Tactile signs generally go on the latch side of the door. The baseline of the lowest tactile character must be at least 48 inches above the floor, and the baseline of the highest line of raised characters no more than 60 inches.

Directional and informational signs don’t need braille, but they do have rules for character size, contrast, and non-glare finishes. Where not all entrances or routes are accessible, signs must direct people to the accessible ones.

Our guide to Utah ADA sign mounting rules covers placement in more detail. Final compliance depends on your building, local code, and plan review, so confirm requirements with your facilities team or code official.

Our Campus Signage Process

Our campus signage process moves from inventory to installation in five steps:

  1. Campus survey and sign inventory. We document existing signs, their condition and their locations, and note gaps and conflicts.
  2. Sign family design to university standards. We design each sign type to your brand guidelines and build a message schedule. For larger programs, the schedule can become part of a master sign plan.
  3. Approvals and procurement. We provide drawings, samples, and pricing for review by facilities, marketing, and purchasing.
  4. Fabrication. Approved signs are built to the final drawings and schedule.
  5. Phased installation between semesters. We schedule installs around the academic calendar so work happens when classrooms and walkways are quiet.

Why Utah Colleges Choose Visibility Signs & Graphics

We manage a campus sign program from survey to installation with one team.

Large-program project management. Campus projects involve many buildings and approvers, so we keep the sign schedule, drawings, and installation plan in one place.

Interior and exterior from one team. The same team designs and builds monuments, wayfinding, room signs, and graphics.

Phased rollouts. Programs can be split by building, zone, or budget year.

This page covers higher education. For K-12 districts and campuses, see our school signs page.

College Sign FAQs

How do you plan wayfinding for a large campus?

We plan campus wayfinding by surveying how people arrive and move, then placing signs at each decision point. That means mapping entrances, parking, transit stops, and main walkways, confirming building names and numbers, and designing a sign family so every directional, map, and building sign follows the same rules.

Can you follow our university brand standards?

Yes, we design signs from your university’s brand guidelines, including approved logos, colors, and fonts. Send us your brand standards and any existing sign standards. We’ll apply them across every sign type and submit drawings to your marketing or communications office for review before fabrication starts.

Do campus classroom signs need braille?

Yes, if the sign identifies a permanent room. The 2010 ADA Standards require raised characters and Grade 2 braille on those signs. Directional and informational signs don’t need braille, but they must meet rules for character size, contrast, and finish.

Can you install signs between semesters?

Yes, we can schedule installation between semesters, during breaks, or over summer. Installing when buildings are quieter limits disruption to classes, labs, and residence halls. We plan the installation sequence with your facilities team, so high-traffic areas are finished before students return.

Do you make donor recognition walls?

Yes, we design and build donor recognition walls for buildings, rooms, and gifts. Walls can be planned with space and a method for adding names later, so new gifts don’t require a full replacement. We work from your advancement office’s naming list and brand standards.

Can you replace outdated campus signs in phases?

Yes, we can replace outdated campus signs in phases by building, zone, or budget year. A sign inventory shows what needs to change first. Many campuses start with entrances, main buildings, and high-traffic routes, then move to interior and lower-priority signs as funding allows.

Send your campus map, sign list, or a few photos for a quote.

Tell us which buildings, entrances, or departments need signs, and share any brand standards your school follows. We’ll plan the full campus package and quote it in one place, from monument signs to room numbers.

Call (801) 212-9987