Overview
Exterior Signs for Manufacturing Facilities
Exterior signs identify the plant and direct drivers and visitors to the correct entry and designate areas where public access is prohibited. Good manufacturing facility signs start at the road and carry the same logic through the property.
A building sign or monument sign provides a street-level name to the plant. Metal panels are well suited for industrial building signs and are a popular option for building signs.
Truck signs are a must. Signs for truck entry and shipping and receiving inform truck drivers where to make a turn, where to check in, and which gate is for deliveries. Visitor parking signs deter visitors from using truck lanes. There are gate and security signs to designate restricted areas and entry points. Design the outside – the plant name at the road, direction at the entrance, and rules at the gate. After that, take a stroll down the path that a driver would follow from the road to the dock and make sure that all of the turns are marked with signs.
Production Floor and Safety Signs
Production floor signs tell workers what hazard is ahead, what protection to wear, how to lock out a machine, and where to go in an emergency. Our safety signs cover four groups.
Hazard and PPE Signs
Signs for hazard and PPE explain a particular hazard and what to do to protect yourself from it. The danger area has danger, warning, and caution signs. Eye, ear and hard hat protection signs are posted at the entry to areas where eye/ear/head protection is required. Plant safety signs are most effective when a worker makes a decision, at the door, at the gate or on the edge of the hazard zone. They should be proportionate to the viewing distance and lighting conditions in the location to ensure that workers can respond to a sign that they can see from the walkway.
Machine and Equipment Labels
Each lockout/tagout point is marked with a machine and equipment label and provides the operator with brief operating instructions. Be succinct and unambiguous about the machine ID. These labels are perched on the operator's shoulder when reading them from the machine, so a lockout point label should be placed beside the point. We design each label as determined by your safety lead. Coolants and heat or daily washdown require a material that can withstand such exposure, as we discuss below.
Area and Department Signs
Signs indicate to people the area and/or department they are in. Production lines, cells, quality, and maintenance all receive their own sign using the line, cell, quality, and maintenance names that your team already uses. Equipment is serviced by hanging signs that are readable from a distance. Wall and Post Signs are used at doorways and aisles.
Emergency Signs
Exits, eyewash stations, fire extinguishers, and evacuation routes are indicated by emergency signs. Evacuation maps are maps that are required to be updated when the floor layout changes, allowing the reader to know his/her location and the closest available exits. Read our blog on egress and stairwell signage for more information on exit signs.
Safety Sign Standards
Two standards shape most safety sign work in United States plants: OSHA 29 CFR 1910.145 and ANSI Z535. OSHA 29 CFR 1910.145 sets specifications for accident prevention signs and tags in general industry. ANSI Z535 sets common sign formats, including signal words, colors, and symbols.
These are reference points, not a promise of compliance. Your safety lead or consultant decides which signs the plant needs and what they say. We build and install the signs on the approved schedule.
Lean, 5S and Visual Management Signs
Lean, 5S, and visual management signs make the state of a work area clear at a glance. They show where things belong and how the line is doing.
- Floor marking graphics outline walkways, work zones, and cart or tool positions. See our floor graphics and floor signs.
- Shadow board labels show the place for each tool, so a missing one is easy to spot.
- KPI boards post targets and results where the team can see them.
- Line status signs show whether a line is running, down, or waiting.
Office, Lobby and Culture Graphics
Office and lobby graphics tell visitors who you are and show employees what the company values. Front office lobby signs are the first thing a visitor reads inside the door. Room ID signs label offices, meeting rooms, and training rooms.
Safety milestone boards track goals such as days without an incident. Wall graphics can put company values on break room and corridor walls.
Materials for Industrial Environments
The right material depends on what the sign will face: chemicals, heat, forklift traffic, or frequent cleaning. We confirm the material after we see the area.
- Aluminum signs hold a rigid, flat shape and suit indoor and outdoor use.
- Dibond signs use an aluminum composite panel with a smooth face for flat signs.
- Rigid plastics suit lighter-duty indoor signs and labels.
- Industrial floor vinyl is made for floor graphics that see foot and forklift traffic.
Wear still depends on traffic, cleaners, and temperature, so we ask about all three before we recommend a material.
Our Process for Manufacturing Signs in Utah
Every manufacturing sign order follows five steps.
- Facility walk with safety and operations leads. We walk the plant to see hazards, traffic routes, surfaces, and mounting points. Bring the people who know where the hazards are and how the shifts run.
- Sign schedule. We list every sign by location, type, size, wording, and material, so you can review the full scope first.
- Design and proof. You approve a proof of each sign type before anything is built.
- Fabrication. We build the signs to the approved schedule and proofs.
- Installation around production shifts. We plan installation around your shifts to limit disruption to production.
Why Utah Manufacturers Choose Visibility Signs & Graphics
Exterior, safety, and office signs can be provided by one team to Utah manufacturers. There is consistency across the plant throughout, based on one sign and one design standard.
Many plants require multiple types of signs, including a new building sign, renamed machines, a new lobby sign, etc. All three can be achieved with one facility walk. You check one schedule, compare one set of proofs, and don't have to match up office and floor styles. For storage, racking, and dock areas, see our warehouse signs.
Manufacturing Sign FAQs
What safety signs does a manufacturing plant need?
A plant typically needs hazard signs, PPE signs, machine and lockout/tagout labels, and emergency signs for exits, eyewash stations, and fire extinguishers. The exact set depends on your processes and hazards. Your safety lead or consultant should confirm requirements, and we build to the schedule you approve.
What do danger, warning and caution signs mean?
Under ANSI Z535 signal words, danger marks a hazard that will cause death or serious injury if not avoided. Warning marks a hazard that could cause death or serious injury. Caution marks one that could cause minor or moderate injury. Your safety team picks the right word for each hazard.
What materials hold up on a production floor?
Aluminum, Dibond, rigid plastics, and industrial floor vinyl are the usual choices. The right one depends on chemicals, heat, forklift traffic, and cleaning in that area. Tell us what the sign will face, and we will recommend a material before you approve the proof.
Can you install signs without stopping production?
We schedule installation around your production shifts. The right window depends on the area and the sign type, and we confirm it during the facility walk. Some work, such as mounting over running equipment, may need a short pause that your operations lead approves.
Do you make floor marking graphics?
Yes, we make floor marking graphics for walkways, work zones, and equipment areas. We use industrial floor vinyl made for foot and forklift traffic. Share your layout and the traffic each area sees, and we will recommend sizes, colors, and materials before you approve a proof.
Can you make custom equipment labels?
Yes, we make custom equipment labels with your machine names, lockout/tagout points, and operating steps. Send the wording and equipment list, or we gather them on the facility walk. We pick label materials that suit the machine’s cleaning, heat, or chemical exposure.
Book a Facility Walk
A facility walk lets us scope every sign in the plant and quote the full schedule.
(801) 212-9987