Visibility Signs & Graphics - Salt Lake City

Van Wraps in Utah

Van wraps turn a cargo or passenger van into a branded, mobile billboard with printed vinyl that covers the sides, rear, and hood. Visibility Signs & Graphics designs, prints, and installs commercial van wraps for plumbers, electricians, cleaners, caterers, and service businesses across Utah.

Design · Production · Installation

Overview

Get a Free Quote ↗

Call (801) 212-9987

What Is a Van Wrap?

A van wrap is printed cast vinyl, sealed with a clear laminate, and applied over the van’s paint. The film stretches into the body’s curves and recesses, so the design looks like part of the van rather than a sign stuck to it.

Van wraps suit vans because their tall, flat side panels offer more open ad space than a pickup or a car, with few body lines breaking up the artwork. For other vehicle types, see our vehicle wraps page.

Van Models We Wrap

We wrap full-size cargo vans, high-roof vans, and minivans, including the models below. Each design is planned around the vehicle’s layout.

  • Mercedes-Benz Sprinter: High-roof Sprinter van wraps get a very tall side panel, but the top sits well above eye level, so phone numbers belong lower.
  • Ford Transit: Ford Transit wraps vary with roof height and length, so the template must match your exact configuration.
  • Ram ProMaster: Its boxy, nearly vertical sides take graphics cleanly, but the split rear doors divide the rear design down the middle.
  • Chevrolet Express: A lower roof and pronounced side body lines mean text has to sit clear of the creases.
  • Nissan NV: The long, pickup-style hood creates a separate front section, so the side layout is planned around that break in the body.
  • Minivans: Curved panels, more glass, and sliding door tracks leave less flat space, so simpler or partial designs work best.

Full, Partial, and Spot Graphics for Vans

You can cover the whole van, part of it, or just add a logo and lettering. The right choice depends on your budget, goals, and the van’s paint color.

Van wrap coverage options

Option

Coverage

Best for

Full wrap

The entire painted body, often with perforated film on rear windows

Maximum visibility, a color change, or a design that runs panel to panel

Partial wrap

A section such as the rear half or lower panels, blended into the paint

Strong branding at a lower cost, using the van’s color in the design

Spot graphics

Logos, lettering and contact details on doors and rear

New businesses, leased vans and tight budgets

For a closer look at the trade-offs, read our guide to full vs partial wraps.

Perforated window film is printed like the rest of the wrap but has small holes, so the driver can see out while traffic behind sees the graphic. Because windshields and front side windows have legal coverage limits, film usually goes on the rear and rear-side glass. Learn more about vehicle window film.

What to Put on a Work Van Wrap

A work van wrap should quickly tell people who you are, what you do, and how to reach you. Include:

  • Logo and Business Name: readable from across the street.
  • Main Services: two or three at most. They read faster than a list of twelve.
  • Phone Number: the detail that turns a glance into a call.
  • Website: short and easy to remember.
  • License Number: where your trade’s licensing rules require it in advertising.
  • USDOT Number: if your van’s weight or use requires one. Check the USDOT lettering rules before design starts.

Keep the rear doors simple. Drivers behind you look at them at every light and in slow traffic, so they should carry the logo, phone number, and website. If that’s what you need displayed, vehicle lettering or a few vehicle decals may do the job.

Our Van Wrap Process

Our van wrap moves through six steps, from measurements to the care guide you take home.

Van Template and Measurements

We start with a template for your make, model, roof height, and length. Then we measure the van so artwork stays clear of handles, vents, and badges.

Design and Proof

Our designers lay your artwork onto the template and send a proof. Nothing gets printed until you approve it.

Print and Laminate

The design is printed on cast vinyl and covered with a laminate that guards against UV and scuffs. See how cast vs. calendered vinyl compare for van wraps.

Surface Prep

The van is washed and cleaned so the vinyl bonds to paint and not to wax or road film.

Installation around Doors, Handles, and Seams.

Installers apply each panel by hand. They work the vinyl into recesses and around the sliding and rear door gaps so every door opens freely.

Inspection and Care Guide

We check every edge and seam, then hand you a care guide with details for maintaining your van wrap.

Van Wrap Care and Lifespan

How long a van wrap lasts depends mostly on the vinyl, sun exposure, and how you wash it. A van parked outside all day ages faster than one kept in a garage, and the hood and roof take the most sun.

These practices help:

  • Hand wash with mild soap and a soft mitt.
  • Keep high-pressure water away from edges and seams, where it can lift the vinyl.
  • Clean off bird droppings, sap, and fuel spills quickly.
  • Have a lifting edge looked at early, before dirt and water work under it.

For the full routine, see our van wrap care tips.

What Affects Van Wrap Cost

Van wrap cost comes down to these main factors:

  • Van Size and Roof Height: An extended high-roof van takes far more material than a low-roof compact van.
  • Coverage: Full wraps cost more than partial wraps, and spot graphics cost the least.
  • Design: Print-ready artwork needs less design time than a layout built from scratch.
  • Window film: Perforated film on rear windows adds material and labor.
  • Old Graphic Removal: Existing vinyl has to come off first, and old, cracked graphics take longer.

Van Wraps in Utah: Why Service Businesses Choose Visibility Signs & Graphics

Visibility Signs & Graphics handles van wrap design and installation in-house. Designers and installers work from the same template, so the artwork you approve is the artwork that fits your van.

That also makes adding vans simpler. When you buy another van, we can repeat your design and adjust the layout for a different model or roof height, so every van carries the same look. For a larger group of vehicles, see fleet wraps. For pickups and box trucks, visit truck wraps.

To see how a wrapped van works as advertising, read our article on van wraps as mobile advertising. If you drive a personal van for work and want branding you can remove after hours, vehicle magnets are a simple option.

Van Wrap FAQs

How long does a van wrap last?

A van wrap’s lifespan depends on the vinyl, sun exposure, and care. Vans garaged at night and hand-washed hold up longer than vans parked outdoors and run through brush car washes. We’ll explain what to expect for your van when we quote.

Can you wrap a leased van?

Yes, leased vans can usually be wrapped, because vinyl can be removed when the lease ends. Check your lease terms first, since some leasing companies restrict graphics. Removal goes best on factory paint in good condition, so tell us about any chips or past repairs.

Can you wrap over van windows?

Yes, rear and rear-side windows can carry perforated window film that shows your graphic outside while the driver still sees out. The law restricts coverage on windshields and front side windows. The film reduces rear visibility somewhat at night or in rain, so we plan window placement during design.

How long does a van wrap install take?

Install time depends on the van’s size, how much is covered, and whether old graphics need removing first. Spot graphics take far less time than a full wrap on a high-roof van. We’ll give you a confirmed drop-off and pickup schedule with your quote.

Will a wrap damage my van’s paint?

A properly installed and removed wrap should not damage factory paint in good condition. While it’s on, the vinyl shields paint from light scratches and sun. Repainted panels, failing clear coat, or chips carry more risk, because adhesive can pull weak paint during removal.

Can you match the design across several vans?

Yes, we can repeat your design across several vans so they look like a matched set. When vans differ in model or roof height, we adjust the layout to each body while keeping the logo, colors, and contact details consistent.

Get a Free Van Wrap Quote

Tell us your van make, model, and roof height for a free quote.

Prefer to talk it through? Call (801) 212-9987.